HomeStore
9500 U1DSS722818 | Type 12, 13 | Stainless steel single door freestanding cabinet for safety disconnect mounted on right flange | 72L x 28W x 18H (in) | EXM
9500 U1DSS722818 | Type 12, 13 | Stainless steel single door freestanding cabinet for safety disconnect mounted on right flange | 72L x 28W x 18H (in) | EXM
The 9500 UxDSS oil and dust tight right flange mounted safety disconnect enclosures are used indoors for protection against dirt, dust, oil and water splashing. One, two or three door combinations are available. The 9500 UxDSS are made of high quality code gauge (type 304) stainless steel with all seams continuously welded. Most center posts can be removed (refer to drawings) to facilitate the installation of the inner panel. The ball bearing pins of the concealed die cast hinges can be easily pulled out to remove the doors. Three point automotive padlockable handles ensure positive closing on all doors. The new latching rod system interlocks with the disconnect handle and eliminates the need to purchase an adaptor. A door interlock is installed to ensure that the left hand door(s) (slave) can only be opened if the right hand door (master) is open and the disconnect switch is powered off. Door and body stiffeners are provided on larger models. Each enclosure comes complete with a galvanized inner panel(s), which mount on M10 welded studs. A print pocket is provided. The enclosures’ exterior is unpainted and brushed smooth. The enclosures’ interior is finished with heat fused powder paint, electro-statically applied on a pretreated base. Inner panel is galvanized (other colors available). CSA Certified / UL Listed NEMA/EEMAC 12-13 / IP55
Made of high quality 304 stainless steel, with continuously welded corner seams. The door is secured by a padlockable 3 point lock mechanism. The enclosure has stainless steel hinges, with safety pins. Floor mounting brackets are installed on the underside of the enclosure. The body's construction is designed to prevent dripping water from entering the enclosure. A bracket prevents the opening of the door when the electric circuit is not closed. The exterior is unpainted and has a finish brushed #4. CSA Certified. UL Listed. NEMA 12, 13. IEC 60529 IP55 (*Drain hole required).
Made of high quality 304 stainless steel, with continuously welded corner seams. The door is secured by a padlockable 3 point lock mechanism. The enclosure has stainless steel hinges, with safety pins. Floor mounting brackets are installed on the underside of the enclosure. The body's construction is designed to prevent dripping water from entering the enclosure. A bracket prevents the opening of the door when the electric circuit is not closed. The exterior is unpainted and has a finish brushed #4. CSA Certified. UL Listed. NEMA 12, 13. IEC 60529 IP55 (*Drain hole required).
Resources
More Info
^^The 9500 U1DSS series is used for indoor use and to protect the equipment against ingress of oil, dust, dirt and water. Protection against corrosion.$3,068.10
Original: $8,765.99
-65%9500 U1DSS722818 | Type 12, 13 | Stainless steel single door freestanding cabinet for safety disconnect mounted on right flange | 72L x 28W x 18H (in) | EXM—
$8,765.99
$3,068.10
Description
The 9500 UxDSS oil and dust tight right flange mounted safety disconnect enclosures are used indoors for protection against dirt, dust, oil and water splashing. One, two or three door combinations are available. The 9500 UxDSS are made of high quality code gauge (type 304) stainless steel with all seams continuously welded. Most center posts can be removed (refer to drawings) to facilitate the installation of the inner panel. The ball bearing pins of the concealed die cast hinges can be easily pulled out to remove the doors. Three point automotive padlockable handles ensure positive closing on all doors. The new latching rod system interlocks with the disconnect handle and eliminates the need to purchase an adaptor. A door interlock is installed to ensure that the left hand door(s) (slave) can only be opened if the right hand door (master) is open and the disconnect switch is powered off. Door and body stiffeners are provided on larger models. Each enclosure comes complete with a galvanized inner panel(s), which mount on M10 welded studs. A print pocket is provided. The enclosures’ exterior is unpainted and brushed smooth. The enclosures’ interior is finished with heat fused powder paint, electro-statically applied on a pretreated base. Inner panel is galvanized (other colors available). CSA Certified / UL Listed NEMA/EEMAC 12-13 / IP55
Made of high quality 304 stainless steel, with continuously welded corner seams. The door is secured by a padlockable 3 point lock mechanism. The enclosure has stainless steel hinges, with safety pins. Floor mounting brackets are installed on the underside of the enclosure. The body's construction is designed to prevent dripping water from entering the enclosure. A bracket prevents the opening of the door when the electric circuit is not closed. The exterior is unpainted and has a finish brushed #4. CSA Certified. UL Listed. NEMA 12, 13. IEC 60529 IP55 (*Drain hole required).
Made of high quality 304 stainless steel, with continuously welded corner seams. The door is secured by a padlockable 3 point lock mechanism. The enclosure has stainless steel hinges, with safety pins. Floor mounting brackets are installed on the underside of the enclosure. The body's construction is designed to prevent dripping water from entering the enclosure. A bracket prevents the opening of the door when the electric circuit is not closed. The exterior is unpainted and has a finish brushed #4. CSA Certified. UL Listed. NEMA 12, 13. IEC 60529 IP55 (*Drain hole required).
Resources
More Info
^^The 9500 U1DSS series is used for indoor use and to protect the equipment against ingress of oil, dust, dirt and water. Protection against corrosion.
