HomeStore
6412 ES040520TH | Type 4, 12 | Single door metric enclosure | 400L x 500W x 200H (in) | EXM
6412 ES040520TH | Type 4, 12 | Single door metric enclosure | 400L x 500W x 200H (in) | EXM
The 6412 ES water, oil & dust tight enclosures are used indoors or outdoors in areas where the enclosures may be subject to hosing or water coming from any direction or for protection against dust, dirt or oil splashing. The 6412 ES is made of high quality 14 GA or 16 GA steel, with corner seams continuously welded. The opening has a curled lip around all sides to increase rigidity and prevent dripping water from entering the box when the door is open. A high quality, seamless gasket, which is robotically poured-in-place, ensures a complete and durable water-tight seal. The captive pins of the concealed hinges can be pulled to remove the door. A ¼ turn locking mechanism (or 3 point latch system on larger enclosures) ensures positive closing. Internal mounting holes are provided. Each enclosure comes complete with a 12 GA galvanized inner panel, which is double bent* for maximum rigidity and can be mounted on M8 welded studs. Enclosures are finished with heat fused powder paint, electro-statically applied on a pretreated base. Box is RAL7035 light gray. The inner panel is unpainted galvanized steel. CSA Certified / UL Listed NEMA/EEMAC 4-12 / IP66
The 6412 ES is made of high quality 14 GA or 16 GA steel, with corner seams continuously welded. The opening has a curled lip around all sides to increase rigidity and prevent dripping water from entering the box when the door is open. A high quality, seamless gasket, which is robotically poured-in-place, ensures a complete and durable water-tight seal. The captive pins of the concealed hinges can be pulled to remove the door. A ¼ turn locking mechanism (or 3 point latch system on larger enclosures) ensures positive closing. Internal mounting holes are provided. Each enclosure comes complete with a 12 GA galvanized inner panel, which is double bent* for maximum rigidity and can be mounted on M8 welded studs. Enclosures are finished with heat fused powder paint, electro-statically applied on a pretreated base. Box is RAL7035 light gray. The inner panel is unpainted galvanized steel.
The 6412 ES is made of high quality 14 GA or 16 GA steel, with corner seams continuously welded. The opening has a curled lip around all sides to increase rigidity and prevent dripping water from entering the box when the door is open. A high quality, seamless gasket, which is robotically poured-in-place, ensures a complete and durable water-tight seal. The captive pins of the concealed hinges can be pulled to remove the door. A ¼ turn locking mechanism (or 3 point latch system on larger enclosures) ensures positive closing. Internal mounting holes are provided. Each enclosure comes complete with a 12 GA galvanized inner panel, which is double bent* for maximum rigidity and can be mounted on M8 welded studs. Enclosures are finished with heat fused powder paint, electro-statically applied on a pretreated base. Box is RAL7035 light gray. The inner panel is unpainted galvanized steel.
Resources
More Info
^^The 6412 ES series is used indoors or outdoors where the enclosures may be subject to hosing or water coming from any direction and for protection against dust, dirt or oil splashing.$567.99
6412 ES040520TH | Type 4, 12 | Single door metric enclosure | 400L x 500W x 200H (in) | EXM—
$567.99
Description
The 6412 ES water, oil & dust tight enclosures are used indoors or outdoors in areas where the enclosures may be subject to hosing or water coming from any direction or for protection against dust, dirt or oil splashing. The 6412 ES is made of high quality 14 GA or 16 GA steel, with corner seams continuously welded. The opening has a curled lip around all sides to increase rigidity and prevent dripping water from entering the box when the door is open. A high quality, seamless gasket, which is robotically poured-in-place, ensures a complete and durable water-tight seal. The captive pins of the concealed hinges can be pulled to remove the door. A ¼ turn locking mechanism (or 3 point latch system on larger enclosures) ensures positive closing. Internal mounting holes are provided. Each enclosure comes complete with a 12 GA galvanized inner panel, which is double bent* for maximum rigidity and can be mounted on M8 welded studs. Enclosures are finished with heat fused powder paint, electro-statically applied on a pretreated base. Box is RAL7035 light gray. The inner panel is unpainted galvanized steel. CSA Certified / UL Listed NEMA/EEMAC 4-12 / IP66
The 6412 ES is made of high quality 14 GA or 16 GA steel, with corner seams continuously welded. The opening has a curled lip around all sides to increase rigidity and prevent dripping water from entering the box when the door is open. A high quality, seamless gasket, which is robotically poured-in-place, ensures a complete and durable water-tight seal. The captive pins of the concealed hinges can be pulled to remove the door. A ¼ turn locking mechanism (or 3 point latch system on larger enclosures) ensures positive closing. Internal mounting holes are provided. Each enclosure comes complete with a 12 GA galvanized inner panel, which is double bent* for maximum rigidity and can be mounted on M8 welded studs. Enclosures are finished with heat fused powder paint, electro-statically applied on a pretreated base. Box is RAL7035 light gray. The inner panel is unpainted galvanized steel.
The 6412 ES is made of high quality 14 GA or 16 GA steel, with corner seams continuously welded. The opening has a curled lip around all sides to increase rigidity and prevent dripping water from entering the box when the door is open. A high quality, seamless gasket, which is robotically poured-in-place, ensures a complete and durable water-tight seal. The captive pins of the concealed hinges can be pulled to remove the door. A ¼ turn locking mechanism (or 3 point latch system on larger enclosures) ensures positive closing. Internal mounting holes are provided. Each enclosure comes complete with a 12 GA galvanized inner panel, which is double bent* for maximum rigidity and can be mounted on M8 welded studs. Enclosures are finished with heat fused powder paint, electro-statically applied on a pretreated base. Box is RAL7035 light gray. The inner panel is unpainted galvanized steel.
Resources
More Info
^^The 6412 ES series is used indoors or outdoors where the enclosures may be subject to hosing or water coming from any direction and for protection against dust, dirt or oil splashing.
