HomeStore
1412 SDSS100302 | Type 4X, 12 | Stainless steel enclosure for standard pushbuttons with cover secured by screws, protection against corrosion | 10L x 3W x 3H (in) | EXM
1412 SDSS100302 | Type 4X, 12 | Stainless steel enclosure for standard pushbuttons with cover secured by screws, protection against corrosion | 10L x 3W x 3H (in) | EXM
The 1412 SDSS oil and dust tight pushbutton enclosures are built to provide protection against corrosion, dirt, dust and oil, for all brands of oil tight pushbuttons, switches and pilot lights. The 1412 SDSS are made of high quality 16 GA (type 304) stainless steel, with all seams continuously welded. A high quality, seamless gasket, which is poured in place, ensures a complete and durable seal of the enclosure. Cover screws thread into sealed wells and are captive. The enclosure can be internally or externally mounted using the included die cast wall mounting feet. These feet have oblong holes to facilitate installation. Hole plugs (880 HP series) are available to seal unused holes. The 1412 SDSS is available with standard and miniature pushbutton holes. The enclosures’ exterior are unpainted and brushed smooth. Enclosures are finished with heat fused powder paint, electro-statically applied on a pretreated base. Boxes are ANSI/ASA 61 smooth gray. CSA Certified / UL Listed NEMA/EEMAC 4X / IP66
Made of high quality 304 stainless steel, with continuously welded corner seams. The cover is secured by screws and is completely removable. A robotically poured-in-place seamless gasket ensures a durable seal. Wall mounting feet are installed on the back face of the enclosure. The body's construction is designed to prevent dripping water from entering the enclosure. Exterior is unpainted with a #4 brushed finish. CSA Certified. UL Listed. NEMA 4X, 12. IEC 60529 IP66.
Made of high quality 304 stainless steel, with continuously welded corner seams. The cover is secured by screws and is completely removable. A robotically poured-in-place seamless gasket ensures a durable seal. Wall mounting feet are installed on the back face of the enclosure. The body's construction is designed to prevent dripping water from entering the enclosure. Exterior is unpainted with a #4 brushed finish. CSA Certified. UL Listed. NEMA 4X, 12. IEC 60529 IP66.
Resources
More Info
^^The 1412 SDSS series is used indoors or outdoors where the enclosures may be subject to hosing or water coming from any direction and for protection against dust, dirt or oil splashing.$362.99
1412 SDSS100302 | Type 4X, 12 | Stainless steel enclosure for standard pushbuttons with cover secured by screws, protection against corrosion | 10L x 3W x 3H (in) | EXM—
$362.99
Description
The 1412 SDSS oil and dust tight pushbutton enclosures are built to provide protection against corrosion, dirt, dust and oil, for all brands of oil tight pushbuttons, switches and pilot lights. The 1412 SDSS are made of high quality 16 GA (type 304) stainless steel, with all seams continuously welded. A high quality, seamless gasket, which is poured in place, ensures a complete and durable seal of the enclosure. Cover screws thread into sealed wells and are captive. The enclosure can be internally or externally mounted using the included die cast wall mounting feet. These feet have oblong holes to facilitate installation. Hole plugs (880 HP series) are available to seal unused holes. The 1412 SDSS is available with standard and miniature pushbutton holes. The enclosures’ exterior are unpainted and brushed smooth. Enclosures are finished with heat fused powder paint, electro-statically applied on a pretreated base. Boxes are ANSI/ASA 61 smooth gray. CSA Certified / UL Listed NEMA/EEMAC 4X / IP66
Made of high quality 304 stainless steel, with continuously welded corner seams. The cover is secured by screws and is completely removable. A robotically poured-in-place seamless gasket ensures a durable seal. Wall mounting feet are installed on the back face of the enclosure. The body's construction is designed to prevent dripping water from entering the enclosure. Exterior is unpainted with a #4 brushed finish. CSA Certified. UL Listed. NEMA 4X, 12. IEC 60529 IP66.
Made of high quality 304 stainless steel, with continuously welded corner seams. The cover is secured by screws and is completely removable. A robotically poured-in-place seamless gasket ensures a durable seal. Wall mounting feet are installed on the back face of the enclosure. The body's construction is designed to prevent dripping water from entering the enclosure. Exterior is unpainted with a #4 brushed finish. CSA Certified. UL Listed. NEMA 4X, 12. IEC 60529 IP66.
Resources
More Info
^^The 1412 SDSS series is used indoors or outdoors where the enclosures may be subject to hosing or water coming from any direction and for protection against dust, dirt or oil splashing.
